What we cut

At Trade CNC we have years’ of experience helping clients to produce products in a wide variety of materials, so whether you have a specific design or material in mind for your requirements you should talk to us first.

Our designers are happy to take on board your fresh ideas and are unfazed by experimenting with new materials in order to achieve the results you are looking for. If something proves unviable, our approach is consultative and we will do our best to come up with alternatives that match the brief with minimal compromise. We always enjoy a challenge, in fact we are sure most of our customers use us because of our technical design based approach.

materials image 2 To give you an idea of our versatility, some of the materials that we CNC on weekly basis are listed below:

  • Wooden substrates including: MDF, Veneered boards, MFC, solid timbers, plywood
  • Plastics including: acrylic, polycarbonate, nylon, PTFE, HDPE, LDPE, PVC and polypropylene
  • More technically dimaterials imagefficult solid surface materials such as Staron, Aronite, Corian,Wilsonart and LG Hi-Macs
  • Signage and building cladding materials such as aluminium composite (dibond)

 

And don’t forget if it is too intricate to CNC then we have the in-house ability to laser cut materials, or if required to use a combination of both.

With our state-of-the-art CNC machines, we have the capability to cut from boards or sheets up to 3050mm x 1550mm (10′ x 5′) and up to 100mm thick.

Over the years we have machined hundreds of different materials with great success, saved our clients’ money and time on their projects and we always deliver on time. We are known for our Customer care; so much so that most of our customers are referred and return on a regular basis.

 

Comments are closed.